[ad_1]

The Toyota Corolla Navigation Unit is really powerful,while the installation for Toyota Corolla is easy.Don’t be scared by theapperance and those complex wires.Follow the installation pictures below,you’ll know it’s really “plug and play”.

Here is the original CD player and radio in the dash:

1
1. fistly, disassemble the right/left bottom trip strip
1-1
2. disassemble the left/right top trip strip near the factory corolla head unit
2
3. the below picture shows the effect aftering doing the above steps
3
4. take out the air outlet from the air conditioner, pay attention to the power plug behind it
4
5. unplug the power plug from the air outlet, then remove the air outlet
5
6. remove these 2 screws as marked
6
7. take out the display panel, pay attention to the back power cable
7
8. remove the 4 screws which is used to fix the original toyota corolla stereo, 2 at left and 2 at right
8
9. take out the air-conditioner control panel, there’s also a power cable at back
10. unplug the power cable and then take the a/c control panel out
11. pull the original toyota corolla radio head unit out.
12. unplug the original corolla radio cable and power cable
12
13. take out the original bracket which is used to fix the toyota corolla stereo
13
14. plug our power cable with the original power cable from the back of the corolla radio
14
15. plug the power cable from the other end with our toyota corolla dvd player, and connect radio cable, GPS antenna
16. here’s the efferct after connection of necessary cables for this toyota corolla dvd navigation unit.
16
17. then push the after market toyota corolla dvd gps navigation into the dashboard
18. fix screws and trip strips, that’s all, here is the after installation picture for toyota corolla dvd player with gps navigation.
18

Here is an overall introduction of this product.

See more about this car DVD player at here!

 

[ad_2]

Source by Autodvdgps